P-U Paints - K-2001

Technical Data Sheet

K-2001 is a two pack Polyurethane Paint based on acrylic polyol and aliphatic hardner. It gives very tough and high glossy top coat with outstanding weathering resistance and colour retention properties. Due to its toughness and chemical resistance properties it finds use in coastal and chemical environments.

Uses :
  • » Fertilizer Plants
  • » Chemical Plants
  • » Oil Refineries
  • » Petrochemical Plants
  • » Railway Coaches
Product Specification :
PRODUCT SPECIFICATION SURFACE PREPARATION
COLOUR Metallic & Solid Colours STEEL SURFACES: Degrease and blast clean or manual cleaning and remove loose rust. Surface should be perfectly clean and dry before applying K – 3001 Zinc Phosphate Primers.

Method of application:
Conventional spray / Airless spray/Brush /Roller for touching up small areas only.

Pot life……………….. : 3 – 4
HrsThinner……………….: PU Thinner 201
Thinner Intake……… :15 –
20% by Volume
FINISH Glossy
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
  9 : 1 ( By volume)
VOLUME SOLIDS 45% Approx.
DFT 30 – 40 Microns
THEORETICAL SPREADING RATE 12 – 14 Sq.meter per litre
DRYING TIME S.D. 30 – 40 minutes
  H.D. 8 – 12 Hrs
  FULL CURE – 7 Days
OVER COATING INTERVAL 12 Hrs Minimum
STORAGE LIFE 6 Months in sealed container
Under standard conditions