Epoxy Paints - K-3003

Technical Data Sheet

K-3003 is a two component Polyamide cured epoxy anticorrosive paint containing coal tar. The paint gives excellent adhesion to steel and it forms highly efficient protective film for corrosive and chemical environments.

Uses :
  • » Chemical Plants
  • » Petrochemical Plants
  • » Fertilizer Plants
  • » Gas Plants
  • » Leaf Spring Industries
Product Specification :

PRODUCT SPECIFICATION Specification
COLOUR Black Surface should be perfectly clean and dry before applying appropriate primer. Mechanical cleaning with tools, manual cleaning and wire brushing to remove the rust.

Method of application:
Brush / Roller / Spray

Pot life……… : 4-6 Hrs
Thinner…… EP Thinner 303
Thinner Intake… :15 – 20% by
Volume
FINISH Egg Shell
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
4 : 1 ( By volume)
VOLUME SOLIDS 45% Approx.
DFT 30 – 35 Microns
THEORETICAL SPREADING
RATE		 14 – 16 Sq.meter per litre
DRYING TIME S.D. 2 – 3 Hrs
H.D. 6 – 8 Hrs
FULL CURE – 7 Days
STORAGE LIFE 12 Months in sealed container
Under standard condition

Data given above are based on laboratory tests; the suitability of the product has to be tested in each case. KPPL retains the right to change the qualifications at any time without any announcement and notification. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control.