Polyester Resins for Coil Coating - KP-3001

Type : Oil free saturated polyester resin
Form of delivery : 60 % in solvent C-9/ Butyl glycol (85-90% C-9 and 10-15% Butyl Glycol)

General Information :

KP – 3001 is a low viscous linear oil free polyester resin developed for use in coil coating and high performance industrial stoving enamels for metal decoration & marine applications.

Features :

  • Excellent properties under various curing conditions with good exterior durability
  • Good light fastness and humidity resistance
  • Good gloss, adhesion, hardness with stain resistance
Product Specifications :
1. Appearance : Clear transparent viscous liquid
2. Colour : Pale yellow to water white
3. Acid value (mg.KOH/gm.) : 10 Max..
4. Non volatile matter ( 1 hr @ 150 ºC : 60 ± 2 %
5. Viscosity @25 ºC (4/20 RPM) B.Field : 1600-2200Cps
6. Hydroxyl value   40 – 45
7. Specific gravity   1.06 ± 0.02

KP-3001 is usually crosslinked with HMM Melamine resins.

The addition of HMMM is usually between 10 – 20% on solid basis. Incorporation of acid catalyst e.g. Para toluene sulphonic acid promotes the curing. 2% to 3% of acid catalyst on Melamine solids is recommended to optimize curing.

The product has excellent pigment wetting properties and high yield pigment concentrates can be formulated.

STORAGE :

Keep away from heat source & direct sunlight. Avoid temp.more than 30 degree C.

PACKING :

210 kg. Net in new MS drums

This general information given above on our product is true & correct to the best of our knowledge, However we do not take any warranty or liability arising out of its use, when the conditions of use is beyond our control.