P-U Paints - K-2002

Technical Data Sheet

K-2002 is a two pack Polyurethane Paint based on polyester polyol and aliphatic hardener. It gives very tough and protective film with very good weathering resistance properties. Due to its toughness and chemical resistance properties it finds use in corrosive and chemical environments.

Uses :
  • » Fertilizer Plants
  • » Chemical Plants
  • » Power Plants
  • » Printing Machineries
  • » Agricultural Implements
Product Specification :
PRODUCT SPECIFICATION SURFACE PREPARATION
COLOUR Solid Colours STEEL SURFACES: Degrease and blast clean or manual cleaning and remove loose rust. Surface should be perfectly clean and dry before applying K – 3001 Zinc Phosphate Primers.

Method of application:

Conventional spray / Airless spray/Brush/ Roller for touching up small areas only.

Pot life……… : 3 – 4 Hrs
Thinner…… Thinner 202
Thinner Intake… :15 – 20% by Volume
FINISH Glossy & Semi glossy
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
  9 : 1 ( By volume)
VOLUME SOLIDS 40% Approx.
DFT 30 – 35 Microns
THEORETICAL
SPREADING RATE		 11 – 13 Sq.meter per litre
DRYING TIME S.D. 1 Hr
  H.D. 12 Hrs
  FULL CURE – 7 Days
OVER COATING INTERVAL 18 Hrs Minimum
STORAGE LIFE 6 Months in sealed container Under standard conditions

Data given above are based on laboratory tests; the suitability of the product has to be tested in each case. KPPL retains the right to change the qualifications at any time without any announcement and notification. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control.