P-U Paints - K-2003

Technical Data Sheet

K-2003 is a two component Polyester Polyurethane ma tt finish with excellent toughness and chemical resistance properties. It finds extensive use in corrosive and chemical environments.

Uses :
  • » Fertilizer Plants
  • » Chemical Plants
  • » Power Plants
  • » Printing Machineries
  • » Agriculture Implements
Product Specification :
PRODUCT SPECIFICATION SURFACE PREPARATION
COLOUR Selected Range STEEL SURFACES: Degrease and blast clean or manual cleaning and remove loose rust. Surface should be perfectly clean and dry before applying K – 3001 Zinc Phosphate Primers.

Method of application:
Conventional spray / Airless spray/Brush / Roller for touching up small areas only. Pot life……… : 3 – 4 Hrs Thinner…… Thinner 203

Thinner Intake… :15 – 20% by Volume
FINISH Matt to Egg Shell
FLASH POINT Above 20º C
MIXING RATIO PAINT : HARDNER
  9 : 1 ( By volume)
VOLUME SOLIDS 40% Approx.
DFT 30 – 35 Microns
THEORETICAL SPREADING RATE 12 – 15 Sq.meter per litre
DRYING TIME S.D. 1 Hr
  H.D. 12 Hrs
  FULL CURE – 7 Days
OVER COATING INTERVAL 12 Hrs Minimum
STORAGE LIFE 6 Months in sealed container
Under standard conditions

Data given above are based on laboratory tests; the suitability of the product has to be tested in each case. KPPL retains the right to change the qualifications at any time without any announcement and notification. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control.