Super Stoving Enamel - K-5001

Technical Data Sheet

K-5001 is based on Alkyd – Amino system. It gives very tough and high glossy film with very good weathering resistance and colour retention properties.

Uses :
  • » General Industries
  • » Bicycle Industries
  • » Auto Industries
  • » OEM
Application Details :
  • » Thinner : Stoving Thinner - 501
  • » Thinner Intake : 20 – 25% by Volume
Product Specification :
PARAMETER SPECIFICATION SURFACE PREPARATION
COLOUR Solid Colours & Metallics STEEL SURFACES: Degrease
and blast clean or manual
cleaning and remove loose rust.
Surface should be perfectly
clean and dry before applying
Primers.

Method of application:

Conventional spray / Airless
spray/Brush / Roller for
touching up small areas only.
FINISH Matt to Glossy
FLASH POINT Above 25º C
VOLUME SOLIDS 40% Approx.
DFT 25 – 30 Microns
THEORETICAL SPREADING
RATE		 10 – 12 Sq.meter per litre
STOVING SCHEDULE 130 ± 10º C for 30 minutes
STORAGE LIFE 12 Months in sealed container
Under standard condition

Data given above are based on laboratory tests; the suitability of the product has to be tested in each case. KPPL retains the right to change the qualifications at any time without any announcement and notification. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control.